Browsing by Author "Jain M."

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Development of iron oxide/activated carbon nanoparticle composite for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution
    (Elsevier B.V., 2018) Jain M.; Yadav M.; Kohout T.; Lahtinen M.; Garg V.K.; Sillanp M.
    Iron oxide (Fe3O4) and iron oxide/activated carbon (Fe3O4/AC) were fabricated by co-precipitation method for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution in batch mode. These nanoparticles were characterized by BET, FTIR, XRD, SEM/TEM and VSM. The optimum conditions for the removal of ions were pH = 2 for Cr(VI) and 6 for Cu(II) and Cd(II), initial metal ion concentration = 50 mg L−1, nanoparticle dose = 50 mg/10 mL, temperature = 25 ± 1 °C, shaking speed = 180 rpm and contact time = 3 h. The equilibrium data of ions sorption were well described by Langmuir, Freundlich, Redlich-Peterson and Intraparticle Diffusion model. The R2 values obtained by Langmuir model were highest by Fe3O4/AC for Cr(VI) = 0.9994,Cu(II) = 0.9998 and Cd(II)= 0.9750. The temperature dependent study in the range of 288–328 K confirmed that the adsorption process was endothermic in nature. Desorption studies with 0.1 M HCl stated that these nanoparticles can be regenerated effectively and can be used after four adsorption-desorption cycles without any mass loss.
  • No Thumbnail Available
    Item
    Optimization of cadmium(II) removal from water using sunflower waste carbon-a statistical approach
    (Taylor and Francis Ltd, 2020) Jain M.; Garg V.K.; Paliwal R.; Kadirvelu K.; Chaudhry S.
    In this study, a statistical experimental strategy was used to optimize the Cd(II) adsorption by chemically treated stems of Helianthus annuus (sunflower). The maximum cadmium adsorption was found at 100 mg/L when a dose of 2000 mg/100 ml was applied at pH 6.0. The highest percentage removal obtained using the model was 100%. The F value (17.28), lack-of-fit value (0.09) and coefficient of determination (R2 = 0.939) established the appropriateness of quadratic model. The results of confirmation experiment, i.e. 99.8% removal of Cd(II) by prepared adsorbent under optimized conditions agreed well with the model predictions.