Department Of Environmental Science And Technology

Permanent URI for this community

http://10.2.3.109/handle/32116/84

Browse

Browsing Department Of Environmental Science And Technology by Subject "Activated carbon"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Development of iron oxide/activated carbon nanoparticle composite for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution
    (Elsevier B.V., 2018) Jain M.; Yadav M.; Kohout T.; Lahtinen M.; Garg V.K.; Sillanp M.
    Iron oxide (Fe3O4) and iron oxide/activated carbon (Fe3O4/AC) were fabricated by co-precipitation method for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution in batch mode. These nanoparticles were characterized by BET, FTIR, XRD, SEM/TEM and VSM. The optimum conditions for the removal of ions were pH = 2 for Cr(VI) and 6 for Cu(II) and Cd(II), initial metal ion concentration = 50 mg L−1, nanoparticle dose = 50 mg/10 mL, temperature = 25 ± 1 °C, shaking speed = 180 rpm and contact time = 3 h. The equilibrium data of ions sorption were well described by Langmuir, Freundlich, Redlich-Peterson and Intraparticle Diffusion model. The R2 values obtained by Langmuir model were highest by Fe3O4/AC for Cr(VI) = 0.9994,Cu(II) = 0.9998 and Cd(II)= 0.9750. The temperature dependent study in the range of 288–328 K confirmed that the adsorption process was endothermic in nature. Desorption studies with 0.1 M HCl stated that these nanoparticles can be regenerated effectively and can be used after four adsorption-desorption cycles without any mass loss.
  • Thumbnail Image
    Item
    Removal of Orange G and Rhodamine B dyes from aqueous system using hydrothermally synthesized zinc oxide loaded activated carbon (ZnO-AC)
    (Elsevier Ltd, 2017) Saini, J.; Garg, V.K.; Gupta, R.K.; Kataria, N.
    This study reports the synthesis of zinc oxide loaded activated carbon (ZnO-AC) using hydrothermal method and its use to remove organic dyes [Orange G (OG) and Rhodamine B (Rh-B)] from the aqueous system under varying process conditions. ZnO-AC nanoparticles were characterized using XRD, SEM, EDX, DLS, and FTIR. The Langmuir adsorption model was best fitted to the experimental data for both the dyes. Langmuir adsorption capacity (qmax) for OG and Rh-B was 153.8 and 128.2 mg/g, respectively. The rate of adsorption was investigated by various models namely pseudo-first-order, pseudo-second-order and intraparticle diffusion model. Rate mechanism was described by pseudo-second-order model for both the dyes. Thermodynamic studies suggested that removal of Rh-B onto ZnO-AC was endothermic up to a temperature of 40 ?C while OG removal decreased with increase in temperature. Negative values of ? G0 for adsorption of dyes suggested spontaneous adsorption processes. ? 2017 Elsevier Ltd. All rights reserved.