Chemistry - Research Publications

Permanent URI for this collectionhttps://kr.cup.edu.in/handle/32116/37

Browse

Subject: search.filters.subject.Oxygen

Search Results

Now showing 1 - 8 of 8
  • No Thumbnail Available
    Item
    Bifunctional electrochemical OER and HER activity of Ta2O5 nanoparticles over Fe2O3 nanoparticles
    (Royal Society of Chemistry, 2023-08-23T00:00:00) Ahmed, Imtiaz; Burman, Vishal; Biswas, Rathindranath; Roy, Ayan; Sharma, Rohit; Haldar, Krishna Kanta
    Hydrogen production via electrocatalytic water splitting offers encouraging innovations for sustainable and clean energy production as an alternative to conventional energy sources. The improvement of extraordinarily dynamic electrocatalysts is of great interest for work on the performance of gas generation, which is firmly blocked due to the sluggish kinetics of the oxygen evolution reaction (OER). The development of highly efficient base metal catalysts for electrochemical hydrogen and oxygen evolution reactions (HER and OER) is a challenging and promising task. In the present work, a particle over particles of Fe2O3 and Ta2O5 was successfully produced by hydrothermal treatment. The prepared composite shows promising catalytic performance when used as an electrochemical catalyst for OER and HER in alkaline and acidic electrolytes with low overpotentials of 231 and 201 mV at 10 mV cm?2, small Tafel slopes of 71 and 135 mV dec?1, respectively, and good stability properties. The calculated electrochemical surface area (ECSA) for composites is five times higher than that of the original oxides. The result of the OER is significantly better than that of commercial IrO2 catalysts and offers a promising direction for the development of water-splitting catalysts. � 2023 The Royal Society of Chemistry.
  • No Thumbnail Available
    Item
    Cu-Metal Organic Framework Derived Multilevel Hierarchy (Cu/CuxO@NC) as a Bifunctional Electrode for High-Performance Supercapacitors and Oxygen Evolution Reaction
    (American Chemical Society, 2023-05-25T00:00:00) Abbas, Zahir; Hussain, Nissar; Ahmed, Imtiaz; Mobin, Shaikh M.
    The development of a MOFs-derived multilevel hierarchy in a single step still remains a challenging task. Herein, we have synthesized novel Cu-MOF via a slow diffusion method at ambient temperature and further utilized it as a precursor source for MOF-derived multilevel hierarchy (Cu/CuxO@NC, x = 1 and 2). This studies suggest that the organic ligands served as a source of an N-doped carbon matrix encapsulated with metal oxide nanoparticles which were confirmed by various characterization techniques; further BET analysis reveals a surface area of 178.46 m2/g. The synthesized multilevel hierarchy was utilized as an electro-active material in a supercapacitor that achieved a specific capacitance of 546.6 F g-1 at a current density of 1 A g-1 with a higher cyclic retention of 91.81% after 10 000 GCD cycles. Furthermore, the ASC device was fabricated using Cu/CuxO@NC as the positive electrode and carbon black as the negative electrode and utilized to enlighten the commercially available LED bulb. The fabricated ASC device was further employed for a two-electrode study which achieved a specific capacitance of 68 F g-1 along with a comparable energy density of 13.6 Wh kg-1. Furthermore, the electrode material was also explored for the oxygen evolution reaction (OER) in an alkaline medium with a low overpotential of 170 mV along with a Tafel slope of 95 mV dec-1 having long-term stability. The MOF-derived material has high durability, chemical stability, and efficient electrochemical performance. This work provides some new thoughts for the design and preparation of a multilevel hierarchy (Cu/CuxO@NC) via a single precursor source in a single step and explored multifunctional applications in energy storage and an energy conversion system. � 2023 American Chemical Society.
  • No Thumbnail Available
    Item
    Green synthesis of hybrid papain/Ni3(PO4)2 rods electrocatalyst for enhanced oxygen evolution reaction
    (Royal Society of Chemistry, 2022-10-21T00:00:00) Ahmed, Imtiaz; Biswas, Rathindranath; Singh, Harjinder; Patil, Ranjit A.; Varshney, Rohit; Patra, Debabrata; Ma, Yuan-Ron; Haldar, Krishna Kanta
    Hydrogen production using electrocatalytic water splitting provides encouraging innovations for enduring and clean energy generation as an option in contrast to traditional energy sources. Improvement in exceptionally dynamic electrocatalysts is of tremendous interest for work on the proficiency of gas generation, which has been emphatically blocked because of the sluggish kinetics of the oxygen evolution reaction (OER). We have synthesized a noble rod-shaped papain/Ni3(PO4)2 catalyst, which was further explored for electrocatalytic OER activity. An environmentally benign approach was applied to prepare binary papain/Ni3(PO4)2 in the presence of papain obtained from green papaya fruit. The yield of Ni3(PO4)2 rod structures could be controlled by varying the amount of papain extract during reaction conditions. The morphology and structural properties of the biogenic papain/Ni3(PO4)2 electrocatalyst were investigated with various microscopic and spectroscopic techniques, for example, FE-SEM, XRD, XPS, and FTIR. To show how such a papain/Ni3(PO4)2 hybrid structure could deliver more remarkable electrocatalytic OER activity, we inspected the correlation between catalytic demonstrations of the papain/Ni3(PO4)2 catalyst and its constituents, and the role of papain on its own was studied during the OER process. A biosynthesised papain/Ni3(PO4)2 catalyst exhibits excellent electrochemical OER performance with the smallest overpotentials of 217 mV, 319 mV and 431 mV in alkaline, neutral and acidic conditions, respectively, at 10 mA cm?2 current density. Transport of ions and electrons is also assisted by the long peptide backbone present in papain, which plays an important role in boosting OER activity. Our results reveal that papain/Ni3(PO4)2 shows better electrocatalytic OER execution along with cyclic stability compared to its different counterparts, owing to synergism-assisted enhancement by several amino acids from papain with metal ions in Ni3(PO4)2 � 2022 The Royal Society of Chemistry.
  • No Thumbnail Available
    Item
    Mechanism of Iron Integration into LiMn1.5Ni0.5O4for the Electrocatalytic Oxygen Evolution Reaction
    (American Chemical Society, 2022-09-14T00:00:00) Ahmed, Imtiaz; Biswas, Rathindranath; Dastider, Saptarshi Ghosh; Singh, Harjinder; Mete, Shouvik; Patil, Ranjit A.; Saha, Monochura; Yadav, Ashok Kumar; Jha, Sambhu Nath; Mondal, Krishnakanta; Singh, Harishchandra; Ma, Yuan-Ron; Haldar, Krishna Kanta
    Spinel-type LiMn1.5Ni0.5O4 has been paid temendrous consideration as an electrode material because of its low cost, high voltage, and stabilized electrochemical performance. Here, we demonstrate the mechanism of iron (Fe) integration into LiMn1.5Ni0.5O4 via solution methods followed by calcination at a high temparature, as an efficient electrocatalyst for water splitting. Various microscopic and structural characterizations of the crystal structure affirmed the integration of Fe into the LiMn1.5Ni0.5O4 lattice and the constitution of the cubic LiMn1.38Fe0.12Ni0.5O4 crystal. Local structure analysis around Fe by extended X-ray absorption fine structure (EXAFS) showed Fe3+ ions in a six-coordinated octahedral environment, demonstrating incorporation of Fe as a substitute at the Mn site in the LiMn1.5Ni0.5O4 host. EXAFS also confirmed that the perfectly ordered LiMn1.5Ni0.5O4 spinel structure becomes disturbed by the fractional cationic substitution and also stabilizes the LiMn1.5Ni0.5O4 structure with structural disorder of the Ni2+ and Mn4+ ions in the 16d octahedral sites by Fe2+ and Fe3+ ions. However, we have found that Mn3+ ion production from the redox reaction between Mn4+ and Fe2+ influences the electronic conductivity significantly, resulting in improved electrochemical oxygen evolution reaction (OER) activity for the LiMn1.38Fe0.12Ni0.5O4 structure. Surface-enhanced Fe in LiMn1.38Fe0.12Ni0.5O4 serves as the electrocatalytic active site for OER, which was verified by the density functional theory study. � 2022 American Chemical Society.
  • No Thumbnail Available
    Item
    Vanadate Encapsulated Polyoxoborate Framework with [V12B18] Clusters: An Efficient Bifunctional Electrocatalyst for Oxygen and Hydrogen Evolution Reactions
    (American Chemical Society, 2022-07-11T00:00:00) Rom, Tanmay; Biswas, Rathindranath; Haldar, Krishna Kanta; Saha, Uttam; Rayaprol, Sudhindra; Paul, Avijit Kumar
    Widespread contemporary attention has grown over the years in the search for a new functional and robust inorganic framework system with the advent of exciting applications. Herein, a facile strategy has been demonstrated for developing noble-metal-free bifunctional electrocatalysts by successfully preparing a polyoxovanadoborate framework compound, i.e., [Na10(H2O)18][(VO)12(?3-OH)6(B3O7)6]�5H2O, i.e., NVBO-I. Anionic vanadoborate clusters are interconnected through a cationic sodium aquated chain to form a three-dimensional framework structure. The compound exhibits remarkable bifunctional activity for oxygen and hydrogen evolution reactions over many well-engineered and state-of-art electrocatalysts under a similar catalytic environment. � 2022 American Chemical Society.
  • No Thumbnail Available
    Item
    DNA Origami-Templated Bimetallic Core-Shell Nanostructures for Enhanced Oxygen Evolution Reaction
    (American Chemical Society, 2022-04-15T00:00:00) Kaur, Gagandeep; Biswas, Rathindranath; Haldar, Krishna Kanta; Sen, Tapasi
    Hydrogen generation through electrocatalytic water splitting offers promising technology for sustainable and clean energy production as an alternative to conventional energy sources. The development of highly active electrocatalysts is of immense interest for improving the efficiency of gas evolution, which is strongly hindered due to the sluggish kinetics of oxygen evolution reaction (OER). Herein, we present the design of Ag-coated Au nanostar (core-shell-type Au@Ag nanostar) monomer structures assembled on rectangular DNA origami and study their electrocatalytic activities through OER, which remains unexplored. Our designed DNA origami-templated bimetallic nanostar catalyst showed excellent OER activity and high stability without using any external binder and exhibited a current density of 10 mA cm-2at a low overpotential of 266 mV, which was smaller than those of ss-DNA-functionalized Au@Ag nanostars and DNA origami-templated pure Au nanostars. Our results reveal that DNA origami-assembled core-shell Au@Ag nanostars show better electrocatalytic performance as compared to pure-core Au nanostars immobilized on DNA origami, owing to the presence of a highly conductive Ag layer. Such controlled assembly of bimetallic nanostructures on a DNA origami template can provide additional electrochemical surface area and a higher density of active sites resulting in enhanced electrocatalysis. � 2022 American Chemical Society. All rights reserved.
  • No Thumbnail Available
    Item
    Charge Separated One-Dimensional Hybrid Cobalt/Nickel Phosphonate Frameworks: A Facile Approach to Design Bifunctional Electrocatalyst for Oxygen Evolution and Hydrogen Evolution Reactions
    (American Chemical Society, 2021-09-30T00:00:00) Rom, Tanmay; Biswas, Rathindranath; Haldar, Krishna Kanta; Sarkar, Sourav; Saha, Uttam; Paul, Avijit Kumar
    Two new organoamine templated one-dimensional transition metal phosphonate compounds are synthesized, and their bifunctional electrocatalytic activities are examined in highly alkaline and acidic media. Compared with state-of-the-art materials, the cobalt phosphonate system is a new fabrication of sustainable and highly efficient catalysts toward electrochemical water splitting systems. � 2021 American Chemical Society. All rights reserved.
  • No Thumbnail Available
    Item
    Interfacial Engineering of CuCo2S4/g-C3N4Hybrid Nanorods for Efficient Oxygen Evolution Reaction
    (American Chemical Society, 2021-07-29T00:00:00) Biswas, Rathindranath; Thakur, Pooja; Kaur, Gagandeep; Som, Shubham; Saha, Monochura; Jhajhria, Vandna; Singh, Harjinder; Ahmed, Imtiaz; Banerjee, Biplab; Chopra, Deepak; Sen, Tapasi; Haldar, Krishna Kanta
    Altering the morphology of electrochemically active nanostructured materials could fundamentally influence their subsequent catalytic as well as oxygen evolution reaction (OER) performance. Enhanced OER activity for mixed-metal spinel-type sulfide (CuCo2S4) nanorods is generally done by blending the material that has high conductive supports together with those having a high surface volume ratio, for example, graphitic carbon nitrides (g-C3N4). Here, we report a noble-metal-free CuCo2S4 nanorod-based electrocatalyst appropriate for basic OER and neutral media, through a simple one-step thermal decomposition approach from its molecular precursors pyrrolidine dithiocarbamate-copper(II), Cu[PDTC]2, and pyrrolidine dithiocarbamate-cobalt(II), Co[PDTC]2 complexes. Transmission electron microscopy (TEM) images as well as X-ray diffraction (XRD) patterns suggest that as-synthesized CuCo2S4 nanorods are highly crystalline in nature and are connected on the g-C3N4 support. Attenuated total reflectance-Fourier-transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy studies affirm the successful formation of bonds that bridge (Co-N/S-C) at the interface of CuCo2S4 nanorods and g-C3N4. The kinetics of the reaction are expedited, as these bridging bonds function as an electron transport chain, empowering OER electrocatalytically under a low overpotential (242 mV) of a current density at 10 mA cm-2 under basic conditions, resulting in very high durability. Moreover, CuCo2S4/g-C3N4 composite nanorods exhibit a high catalytic activity of OER under a neutral medium at an overpotential of 406 mV and a current density of 10 mA cm-2. � 2021 American Chemical Society.