Department Of Physics

Permanent URI for this communityhttps://kr.cup.edu.in/handle/32116/57

Browse

Author: search.filters.author.Yadav, B.C.Subject: search.filters.subject.Energy density

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Economic and environment friendly carbon decorated electrode for efficient energy storage devices
    (Elsevier Ltd, 2023-04-26T00:00:00) Singh, Nirbhay; Tanwar, Shweta; Sharma, A.L.; Yadav, B.C.
    The most dependent storage technologies are secondary batteries and supercapacitors. Supercapacitors are more competent regarding faster energy supply, sustainability, and high-capacity retaining. However, in supercapacitors, most research comprises the least abundant materials that raise the cost and toxicity, which are unfavorable to the environment. Therefore, we have prepared activated carbon-based earth-abundant iron oxyhydroxide material via a low-temperature hydrothermal technique. The key finding of this research is sustainable materials, with co-related studies of TEM and GCD cyclic stability (pre and post-cycling characterizations up to 10k). The X-ray photoelectron spectroscopy analysis reveals the elemental composition of the optimized sample. The electrochemical performance has been tested via galvanostatic charge-discharge analysis, electrochemical impedance spectroscopy, and cyclic voltammetry. The cyclic stability evaluation is done to see the lasting usability of the device for the 10,000th number of charging-discharging cycles, which is supported by electrochemical impedance spectroscopy results in form of a Nyquist plot. The galvanostatic charge-discharge analysis revealed the specific capacitance of 372 F g?1 at 2 mA. The specific energy and power density were obtained as 40 Wh kg?1 and 4200 W kg?1, respectively. The ACF1 shows Coulombic efficiency and capacity retention as 96 % and 80 %, respectively, up to 10k cycles. We have proposed a charge storage mechanism for the fabricated electrode. A supercapacitor has been made-up and tested for the glow of LED, and the device can glow LED for 20 min. The device was repeated after two months and reproduced the LED glow for the same duration. � 2023 Elsevier Ltd
  • No Thumbnail Available
    Item
    High efficient activated carbon-based asymmetric electrode for energy storage devices
    (Elsevier Ltd, 2022-01-19T00:00:00) Singh, Nirbhay; Tanwar, Shweta; Yadav, B.C.; Sharma, A.L.
    Electrodes are fabricated using activated carbon@FeOOH and MoSe2. The synthesis of both electrode materials individually is done by a one-step hydrothermal process. The structural, morphological and chemical information's are investigated by XRD, FESEM and FTIR respectively. The electrochemical properties are investigated by EIS, CV and GCD. The Nyquist plot gives the value of Rb and Rct as 1.0 ? and 1.3 ? respectively. The cell shows a maximum specific capacitance of 110 F/g at the scan rate of 40 mV/s and the GCD shows a specific capacitance of 87.5 F/g at a high current density of 10 A/g. The energy density and power density calculated at current density 10 A/g are 31.11 Wh kg?1 and 4479 W kg?1, additionally, the maximum power density is 16000 W/kg, which is obtained at a current density of 40 A/g. The cell shows structural stability up to 5000 cycles with a capacity retention of 79%. The overall electrochemical performance of asymmetric electrodes (activated carbon@FeOOH and MoSe2) indicated its potential application in supercapacitors at commercial scale. � 2022