Department Of Physics
Permanent URI for this communityhttps://kr.cup.edu.in/handle/32116/57
Browse
4 results
Search Results
Item Effects of Interfacial Interactions and Nanoparticle Agglomeration on the Structural, Thermal, Optical, and Dielectric Properties of Polyethylene/Cr2O3 and Polyethylene/Cr2O3/CNTs Nanocomposites(Springer, 2022-11-22T00:00:00) Gupta, Jaya; Kumar, Ajay; Roy, Ayan; Anu; Deeksha; Kour, Pawanpreet; Singh, Ravi Pratap; Yogesh, Gaurav Kumar; Yadav, KamleshIn this report, we have synthesized the binary and ternary phase nanocomposites [(polyethylene (PE)1?X/(Cr2O3)x) and (PE)1?X/(Cr2O3)X/CNTs (where X = 0,�2%, 4%, 6%, 8%, and 10%)] using the melt mixing method and studied the structural, optical, thermal and dielectric properties with an increase in Cr2O3 nanofiller concentration. Our results show an increase in interfacial interactions between Cr2O3 nanofiller and PE matrix with an increase in nanofiller concentration up to X = 6%. After that, the interactions decreased with a further increase in X because of the increase in the size of the Cr2O3 nanoparticle aggregates. Incorporating 2% carbon nanotubes (CNTs) into (PE)1?X/(Cr2O3)X nanocomposites, further decreases the interactions between the Cr2O3 nanofiller and the PE matrix. � 2022, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.Item Synergistically modified WS2@PANI binary nanocomposite-based all-solid-state symmetric supercapacitor with high energy density(Royal Society of Chemistry, 2022-03-09T00:00:00) Iqbal, Muzahir; Saykar, Nilesh G.; Alegaonkar, Prashant S.; Mahapatra, Santosh K.The rapid development of intelligent, wearable, compact electronic equipment has triggered the need for durable, flexible, and lightweight portable energy storage devices. Nanomaterials that are capable of delivering the high specific power density and commensurate energy density are potential candidate for realizing such devices. Herein, we report the facile synthesis of a binary nanocomposite WS2@PANI by utilizing hydrothermal and physical blending techniques to assess it as an electrode material for high-performance supercapacitors. The nanocomposite electrode delivered specific capacitance >335 F g?1 @ 10 mV s?1 (two-electrode), achieving energy and power densities of ?80 W h kg?1 and ?800 W kg?1, respectively, with capacitance retention of 83% even after 5000 charge-discharge cycles @ 10 A g?1, all of which are superior to the WS2 electrode. Dunns model quantifies capacitive and intercalative contributions that showed the cumulative effect of both to realize a robust, cost-effective, and energy-efficient device. The strategically incorporated PANI broadened the electrochemical window and the device's overall performance, resulting in high specific energy density. We demonstrated that our all-solid-state symmetric supercapacitor could be used to illuminate a light-emitting diode and drive a rotary motor. We believe that our WS2@PANI binary nanocomposite will be a potential candidate for energy storage devices. � 2022 The Royal Society of ChemistryItem Enhanced capacitive behaviour of graphene nanoplatelets embedded epoxy nanocomposite(Springer, 2021-01-06T00:00:00) Raval, Bhargav; Sahare, P.D.; Mahapatra, S.K.; Banerjee, I.For the development of advanced polymer nanocomposite processability, high-quality and cost-efficiency plays a crucial role which combines mechanical robustness with functional electrochemical properties. In this study, we fabricated the epoxy/graphene nanocomposite (EGNC) with different wt% ratio of graphene nanoplatelets (GNPs). The EGNCs were fabricated through a solution mixing process and used it as an electrode to enhance electrochemical properties. The GNPs and EGNCs characterized using XRD, Raman spectroscopy, ATR FT-IR, and FE-SEM for the structural conformation and surface morphological study. The electrochemical analysis results show significant improvement in the specific capacitance in the EGNC samples as compared to the blank epoxy film. Specific capacitance 17.74 Fg?1 was recorded at 10 mVs?1 scan rate in 1.0�M KOH electrolyte solution for the 1.0 wt% EGNC film by cyclic voltammetry analysis. The Galvanostatic charge�discharge and Ragone plots also show mended results by the addition of GNPs. � 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC part of Springer Nature.Item Nanofiller-assisted Na+-conducting polymer nanocomposite for ultracapacitor: structural, dielectric and electrochemical properties(Springer, 2021-01-04T00:00:00) Kamboj, Vashu; Arya, Anil; Tanwar, Shweta; Kumar, Vijay; Sharma, A.L.We report the preparation of ZrO2 nanofiller-incorporated polymer nanocomposite electrolyte based on the PEO-NaPF6 matrix via standard solution cast method. The structure and morphology of polymeric films have been examined with X-ray diffraction and field emission scanning electron microscopy. Different interactions between the polymer, salt and nanofiller have been examined by Fourier transform infrared technique. The temperature-dependent (40�100��C) electrical conductivity has been examined from complex impedance spectroscopy (CIS). The highest ionic conductivity is exhibited by 5�wt% nanofiller-based electrolyte and recorded ~ 2 � 10�4�S�cm?1 at 100��C. The voltage stability window of polymeric film checked from linear sweep voltammetry is about ~ 4�V, and ion transference number close to unity confirms the major contribution from ion conduction. The dielectric properties have been explored in terms of complex permittivity, loss tangent and complex conductivity. The dielectric plots have been further fitted with an associated equation to evaluate principal dielectric parameters. The optimized polymer electrolyte possesses the lowest relaxation time and the highest dielectric constant that suggests the highest ionic conductivity, which is in good correlation with impedance results. The dc conductivity is also highest for the optimum system, and relaxation time decreases with an increase in temperature. The thermal stability of polymer electrolytes is about 200��C, as examined by thermogravimetric analysis (TGA). The ion transport parameters n, ?, D have been evaluated via FTIR, impedance spectroscopy and Bandara and Mellander (B�M) approach. Finally, the optimized polymer nanocomposite film has been used as an electrolyte-cum-separator for the fabrication of a solid-state symmetric supercapacitor. The electrochemical parameters specific capacitance, energy density, power density have been examined from cyclic voltammetry and galvanostatic charge�discharge technique. It may be concluded that nanofiller incorporation is an effective strategy to enhance the properties of electrolyte and has the potential to adopt as an electrolyte-cum-separator for ultracapacitor. � 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC part of Springer Nature.