Department Of Physics
Permanent URI for this communityhttps://kr.cup.edu.in/handle/32116/57
Browse
2 results
Search Results
Item Structural, microstructural and electrochemical properties of dispersed-type polymer nanocomposite films(Institute of Physics Publishing, 2018) Arya, A.; Sharma, A.L.Free-standing solid polymer nanocomposite (PEO-PVC) + LiPF6-TiO2 films have been prepared through a standard solution-cast technique. The improvement in structural, microstructural and electrochemical properties has been observed on the dispersion of nanofiller in polymer salt complex. X-ray diffraction studies clearly reflect the formation of complex formation, as no corresponding salt peak appeared in the diffractograms. The Fourier transform infrared analysis suggested clear and convincing evidence of polymer-ion, ion-ion and polymer-ion-nanofiller interaction. The highest ionic conductivity of the prepared solid polymer electrolyte (SPE) films is ?5 10-5 S cm-1 for 7 wt.% TiO2. The linear sweep voltammetry provides the electrochemical stability window of the prepared SPE films, about ?3.5 V. The ion transference number has been estimated, t ion = 0.99 through the DC polarization technique. Dielectric spectroscopic studies were performed to understand the ion transport process in polymer electrolytes. All solid polymer electrolytes possess good thermal stability up to 300 ?C. Differential scanning calorimetry analysis confirms the decrease of the melting temperature and signal of glass transition temperature with the addition of nanofiller, which indicates the decrease of crystallinity of the polymer matrix. An absolute correlation between diffusion coefficient (D), ion mobility (?), number density (n), double-layer capacitance (C dl), glass transition temperature, melting temperature (T m), free ion area (%) and conductivity (?) has been observed. A convincing model to study the role of nanofiller in a polymer salt complex has been proposed, which supports the experimental findings. The prepared polymer electrolyte system with significant ionic conductivity, high ionic transference number, and good thermal and voltage stability could be suggested as a potential candidate as electrolyte cum separator for the fabrication of a rechargeable lithium-ion battery system. ? 2018 IOP Publishing Ltd.Item Highly stable supercapacitive performance of one-dimensional (1D) brookite TiO2 nanoneedles(Royal Society of Chemistry, 2016) Devan, R.S.; Ma, Y.-R.; Patil, R.A.; Lukas, S.-M.We report the highly stable supercapacitive performance of one-dimensional (1D) nanoneedles of brookite (?) TiO2 synthesized on a conducting glass substrate. The 1D ?-TiO2 nanoneedles synthesized over a large area array utilizing hot-filament metal vapor deposition (HFMVD) were ?24-26 nm wide, ?650 nm long and tapered in a downward direction. X-ray photoemission spectroscopy (XPS) revealed their chemical properties and stoichiometric Ti and O composition. The 1D ?-TiO2 nanoneedles execute as parallel units for charge storage, yielding a specific capacitance of 34.1 mF g-1. Electrochemical impedance spectroscopy revealed that the large surface area and brookite crystalline nature of the 1D nanoneedles provided easy access to Na+ ions, and resulted in low diffusion resistance, playing a key role in their stable charging-discharging electrochemical mechanism. Moreover, the non-faradic mechanism of these nanoneedles delivered better durability and high stability up to 10000 cycles, and a columbic efficiency of 98%. Therefore, 1D ?-TiO2 nanoneedles hold potential as an electrode material for highly stable supercapacitive performance with long cycle lifetime. ? 2016 The Royal Society of Chemistry.