School Of Environment And Earth Sciences

Permanent URI for this communityhttps://kr.cup.edu.in/handle/32116/83

Browse

Author: search.filters.author.Jasrotia, RimzimHas files: No

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Novel Zinc ferrite composite with starch and carboxy methyl starch from biowaste precursor for the removal of Ni (II) ion from aqueous solutions
    (Taylor and Francis Ltd., 2023-06-19T00:00:00) Sharma, Dimple; Jasrotia, Rimzim; Singh, Jandeep; Mittal, Sunil; Singh, Harminder
    In the present work, Zinc ferrite composites with Mango starch (MS) and carboxymethyl mango starch (CMMS) were synthesized for the removal of Ni (II) ions from aqueous solutions. Composites prepared were characterized by Fourier Transform Infrared (FTIR) Spectroscopy, X-Ray Diffraction (XRD) analysis, pH of point zero charge (pHzpc), Scanning Electron Microscopy (SEM), and BET. Batch adsorption technique was used to study effect of various parameters such as pH, adsorbent dose, contact time, concentration, and temperature for removal of Ni (II) ions from aqueous solutions. The optimum time, pH, adsorbent dose and temperature required for ZFN@ MS and ZFN@ CMMS in this study was 110 min., 7 & 8, 0.1 g and 308 K, respectively. Out of various adsorption isotherms, Freundlich isotherm model fitted best with adsorption data. Maximum adsorption capacity for removal of Ni (II) were found to be 65.3 and 208.3 mg/g, respectively by using Zinc ferrite@ MS and Zinc ferrite@ CMMS adsorbents. Lagergren Pseudo second order model best fitted with results which indicated that the process of adsorption was chemical in nature. The value of adsorption energy for ZFN@ MS was 50 kJ/mol and for ZFN@ CMMS, it was 31.62 kJ/mol. Thermodynamic study revealed that process was endothermic and non-spontaneous in nature. Regeneration studies were conducted for five cycles where Zinc ferrite@ MS showed 71% regeneration efficiency and Zinc ferrite@ CMMS showed 78% regeneration efficiency for nickel ion removal from aqueous solution. � 2023 Taylor & Francis Group, LLC.
  • No Thumbnail Available
    Item
    Synthesis of CTAB modified ferrite composite for the efficient removal of brilliant green dye
    (Taylor and Francis Ltd., 2022-07-08T00:00:00) Jasrotia, Rimzim; Singh, Jandeep; Mittal, Sunil; Singh, Harminder
    In the present work, magnetic nickel ferrite (NiFe2O4) have been synthesised using low temperature combustion method and then modified with Cetyltrimethylammonium bromide (CTAB) to form a magnetic composite. Prepared composite (CTAB-NiFe2O4) was used as an adsorbent for removing brilliant green dye from aqueous solution. Adsorbent was investigated by using various techniques like Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, energy-dispersive spectra, thermogravimetric analysis and pH of point zero charge. Different parameters such as effect of contact time, pH, adsorbent dose and initial dye concentration were studied for the adsorption of dye. The optimum values observed were 170�minutes equilibrium time at pH 6 and adsorbent dose 0.6�g. Various adsorption kinetic models such as pseudo first-order kinetic model, pseudo second-order kinetic model and Elovich model were used to determine the nature of adsorption. Pseudo second-order kinetic model fitted better with higher R2 value which indicated that the adsorption was chemical in nature. Langmuir isotherm was best fitted to experimental data for the adsorption of brilliant green dye with maximum adsorption capacity �Qe� 250 mg/g. It revealed that the adsorption in this study takes place on homogenous surface and follows monolayer pattern. Therefore, for the removal of Brilliant green dye from wastewater using composite (CTAB-NiFe2O4) can be considered as an effective adsorbent. � 2022 Informa UK Limited, trading as Taylor & Francis Group.