School Of Environment And Earth Sciences
Permanent URI for this communityhttps://kr.cup.edu.in/handle/32116/83
Browse
6 results
Search Results
Item Biogenic fabrication of ZnO@EC and MgO@EC using Eucalyptus leaf extract for the removal of hexavalent chromium Cr(VI) ions from water(Springer Science and Business Media Deutschland GmbH, 2023-01-04T00:00:00) Chauhan, Amit Kumar; Kataria, Navish; Gupta, Renuka; Garg, Vinod KumarZinc and magnesium oxide nanoparticles were fabricated using green synthesis method for the sequestration of hexavalent chromium Cr(VI) from the aqueous medium. The biogenically prepared ZnO@EC and MgO@EC nanoparticles were successfully loaded on the Eucalyptus. The prepared nanomaterials were characterized using various techniques such as FESEM, TGA, XRD, EDX, FTIR, BET, and elemental mapping. FE-SEM analysis has revealed the surface morphology of ZnO nanoparticles, which were rod-like and spherical in shape, whereas MgO nanoparticles were of irregular shape. Batch mode was selected to remove the hexavalent chromium from aqueous solution using the prepared nanomaterials. The Cr(VI) adsorption was carried out under optimized conditions, viz., pH (3.0), adsorbent dose (0.05�g), contact time (150�min), temperature (25 � 2��C), and initial concentration (50�mg/L). The experimental results were compared using the different isotherm models; The observations have indicated that experimental data fit better with Freundlich (R2 = 0.99) and Langmuir (R2 = 0.99)�isotherms, respectively. The maximum adsorption capacity of ZnO@EC and MgO@EC for Cr(VI) was found to be 49.3 and 17.4�mg/g, respectively. The regeneration study of the adsorbents was conducted using different desorbing agents viz., ethanol, NaOH, and NaCl. The desorbing agent NaOH performed better and showed removal percentage of 34.24% and 20.18% for ZnO@EC and MgO@EC, respectively, after the three reusability cycles. The kinetics of reaction was assessed using the pseudo-first-order and pseudo-second-order kinetic models. The experimental data of both the nanomaterials ZnO@EC and MgO@EC obeyed pseudo-second-order model with correlation coefficient values 0.999 and 0.983, respectively. The thermodynamic study confirmed that adsorption was feasible, spontaneous, and endothermic. The adsorbents were tested for spiked real water which confirms their applicability and potential in real water systems also. The results indicated fair removal of chromium suggesting applicability of both adsorbents. � 2023, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.Item Utilization of biosynthesized silica-supported iron oxide nanocomposites for the adsorptive removal of heavy metal ions from aqueous solutions(Springer Science and Business Media Deutschland GmbH, 2022-06-07T00:00:00) Garg, Rishav; Garg, Rajni; Khan, Md. Amir; Bansal, Manjeet; Garg, Vinod KumarThis study deals with heavy metal ions removal from simulated water using biosynthesized silica-supported iron oxide nanocomposites (nano-IOS). Agricultural and garden wastes have been utilized to prepare nano-IOS through a green synthesis process. Nano-IOS was characterized by XRD, SEM, FTIR, and zeta potential analysis. The nanocomposites were used to remove five heavy metals, viz., Pb2+, Cd2+, Ni2+, Cu2+, and Zn2+, with optimization of reaction parameters including pH, the concentration of heavy metals, adsorbent dosage, and contact time in batch mode experiments. The optimized dose of nano-IOS was 0.75�g/L for the adsorption of Pb2+, Cd2+, Ni2+, Cu2+, and Zn2+ (10.0�mg/L) with a contact duration of 70�min at pH 5.0 for Pb2+, Cd2+, and Cu2+ and 6.0 for Ni2+ and Zn2+. The adsorption behavior of the nano-adsorbent was well described by Langmuir adsorption isotherm and pseudo-second-order kinetic model indicating chemisorption on the surface of nano-IOS. The adsorption was also found spontaneous and endothermic. Thus, the environmentally benign and bio-synthesized nano-IOS can be utilized as an effective nano-adsorbent for the rapid sequestration of heavy metal ions�from water and wastewater. � 2022, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.Item Pb2+ and Cd2+ recovery from water using residual tea waste and SiO2@TW nanocomposites(Elsevier, 2020) Joshi, S; Kataria, N; Garg, V.K; Kadirvelu, K.This work reports the fabrication of SiO2@TW nanocomposites and their application for Pb2+ and Cd2+ ions sequestration from simulated water. Residual tea waste has also been used for metal ions sequestration to compare the potential of SiO2@TW nanocomposites. The SEM, TEM, BET, FTIR and EDX techniques were employed for the characterization of SiO2@TW nanocomposites and residual tea waste. Particle sizes of SiO2@TW nanocomposites was in the range of 6.8-12 nm. The experiments were carried out in batch mode to explore the effect of various operating parameters on the sequestration of Pb2+ and Cd2+ ions from water. The experimental data was subjected to various thermodynamic, kinetic and isothermic models. According to Langmuir model, the maximum adsorption efficiency of the SiO2@TW nanocomposites was 153 mg/g for Pb2+ and 222 mg/g for Cd2+ but maximum adsorption efficiency of residual tea waste for Pb2+ was 125 mg/g and for Cd2+ was 142.9 mg/g. This study suggested that due to the presence of active sites SiO2@TW nanocomposites has greater potential for metal sequestration than residual tea waste. 2020 Elsevier LtdItem Application of EDTA modified Fe3O4/sawdust carbon nanocomposites to ameliorate methylene blue and brilliant green dye laden water(Academic Press Inc., 2019) Kataria N.; Garg V.K.This work explored the potential of magnetic sawdust carbon nanocomposites for cationic dyes removal from aqueous medium. EDTA modified magnetic sawdust carbon nanocomposites (EDTA@Fe3O4/SC ncs) were prepared by biogenic green reduction and precipitation approach. The surface properties, structure and composition of nanocomposites were characterized by HRTEM, FESEM, XRD, EDX, BET, FTIR etc. The Fe3O4 nanoparticles were 10-20 nm in diameters and having 14 m2/g surface area. Removal of Methylene blue (MB) and Brilliant green (BG) dyes from aqueous medium was studied in batch mode experiments. The maximum removal was achieved at neutral pH 7.0 with in 30 min. Adsorption capacity of EDTA@Fe3O4/SC for MB and BG dyes was 227.3 mg/g and 285.7 mg/g, respectively. Dye adsorption behaviour is well explained by Freundlich model. The rate of cationic dye adsorption is explained by pseudo-second order model. The value of thermodynamic parameters confirmed that adsorption process was spontaneous and favourable. Desorption and reusable efficiency of nanocomposites was also evaluated.Item Green synthesis, activation and functionalization of adsorbents for dye sequestration(Springer, 2019) Mudhoo, A; Gautam, R.K; Ncibi, M.C; Zhao, F; Garg, V.K; Sillanpää, M.The release of recalcitrant dyes into the biosphere is a threat because of pollution and environmental health issues. Adsorption using commercial activated carbon has been effective in industrial dye-loaded effluent remediation to some acceptable extent. However, commercial activated carbon suffers from limitations related to cost, relatively lower adsorption capacity, fewer microporous and mesoporous networks in comparison with other competing adsorbents, and reduced adsorption efficiency after regeneration. Here we review the recent developments in applying microwave irradiation, ultrasonication, ionic liquids and nanoscience for the preparation, activation, and physical, chemical and biological functionalization of novel and more potent adsorbents such as metal, mineral, carbon and polymer-based nanoparticles for dye removal. We observed that microwave and ultrasound irradiation and the use of ionic liquids are highly beneficial for the preparation of adsorbent materials; those adsorbents display enhanced porous structures and morphologies that account for much larger surface areas for faster adsorption interactions. Graphene-based, magnetic, cellulose-based and nanocomposite adsorbents are more selective and thermally more stable, faster in dye adsorption kinetics, have higher adsorption capacities for many dyes and can be regenerated for reuse without significant decrease in adsorption capacity. The scales of fabrication of green adsorbents do not go beyond the kilogram scale. © 2018, Springer Nature Switzerland AG.Item Application of EDTA modified Fe3O4/sawdust carbon nanocomposites to ameliorate methylene blue and brilliant green dye laden water(Academic Press, 2019) Kataria, N; Garg, V.K.This work explored the potential of magnetic sawdust carbon nanocomposites for cationic dyes removal from aqueous medium. EDTA modified magnetic sawdust carbon nanocomposites (EDTA@Fe3O4/SC ncs) were prepared by biogenic green reduction and precipitation approach. The surface properties, structure and composition of nanocomposites were characterized by HRTEM, FESEM, XRD, EDX, BET, FTIR etc. The Fe3O4 nanoparticles were 10–20 nm in diameters and having 14 m2/g surface area. Removal of Methylene blue (MB) and Brilliant green (BG) dyes from aqueous medium was studied in batch mode experiments. The maximum removal was achieved at neutral pH 7.0 with in 30 min. Adsorption capacity of EDTA@Fe3O4/SC for MB and BG dyes was 227.3 mg/g and 285.7 mg/g, respectively. Dye adsorption behaviour is well explained by Freundlich model. The rate of cationic dye adsorption is explained by pseudo-second order model. The value of thermodynamic parameters confirmed that adsorption process was spontaneous and favourable. Desorption and reusable efficiency of nanocomposites was also evaluated. © 2019 Elsevier Inc.