School Of Basic And Applied Sciences
Permanent URI for this communityhttps://kr.cup.edu.in/handle/32116/17
Browse
5 results
Search Results
Item Insight into use of biopolymer in hybrid electrode materials for supercapacitor applications�A critical review(American Institute of Physics Inc., 2023-05-12T00:00:00) Tanwar, Shweta; Sharma, A.L.The shortage of natural resources due to the progression of the human population and environmental pollution has become crucial concern topics to resolve. One of the best ways to resolve this is to develop renewable energy-based storage systems. Supercapacitors are emerging as promising storage systems via providing rapid charging/discharging and high power delivery, but there is a need to explore low-cost, environment-friendly, non-toxic, abundant, and biodegradable electrode materials for supercapacitors. In this regard, biopolymers are observed to be popular for storage applications as they are of high porosity, cost-effective, easily available, low-weight, and environment friendly and have biodegradability properties. The biopolymer-based electrode has a desirable morphology and high surface area and exhibits admirable electrochemical properties. The focus of this report is to highlight (i) the inclusive details of supercapacitors and their types along with strategies to improve their electrochemical performance, (ii) biopolymers and their types used for supercapacitor applications, (iii) various synthesis routes that could be adopted for designing electrode materials based on biopolymers for supercapacitors, and (iv) challenges and future scope of biopolymers as the electrode material in supercapacitor applications. The detailed study here in this report is found to be a topic of interest for the scientific community to fabricate and prepare low-cost, eco-friendly, high electrochemical performance exhibiting electrode materials for supercapacitor applications. � 2023 Author(s).Item Synergistically modified WS2@PANI binary nanocomposite-based all-solid-state symmetric supercapacitor with high energy density(Royal Society of Chemistry, 2022-03-09T00:00:00) Iqbal, Muzahir; Saykar, Nilesh G.; Alegaonkar, Prashant S.; Mahapatra, Santosh K.The rapid development of intelligent, wearable, compact electronic equipment has triggered the need for durable, flexible, and lightweight portable energy storage devices. Nanomaterials that are capable of delivering the high specific power density and commensurate energy density are potential candidate for realizing such devices. Herein, we report the facile synthesis of a binary nanocomposite WS2@PANI by utilizing hydrothermal and physical blending techniques to assess it as an electrode material for high-performance supercapacitors. The nanocomposite electrode delivered specific capacitance >335 F g?1 @ 10 mV s?1 (two-electrode), achieving energy and power densities of ?80 W h kg?1 and ?800 W kg?1, respectively, with capacitance retention of 83% even after 5000 charge-discharge cycles @ 10 A g?1, all of which are superior to the WS2 electrode. Dunns model quantifies capacitive and intercalative contributions that showed the cumulative effect of both to realize a robust, cost-effective, and energy-efficient device. The strategically incorporated PANI broadened the electrochemical window and the device's overall performance, resulting in high specific energy density. We demonstrated that our all-solid-state symmetric supercapacitor could be used to illuminate a light-emitting diode and drive a rotary motor. We believe that our WS2@PANI binary nanocomposite will be a potential candidate for energy storage devices. � 2022 The Royal Society of ChemistryItem Synergistic photophysical and electrochemical response of Te @ PANI for energy harvesting(Springer, 2023-01-07T00:00:00) Rani, Pinki; Jewariya, Yogesh; Haldar, Krishna Kanta; Biswas, Rathindranath; Alegaonkar, Prashant S.Materials with synergistic functionality are of great importance in consumer electronics. We report on the preparation and assessments of Te @ PANI composite for energy conversion and storage application. Initially, (5�15%) Te @ PANI composites were synthesized by the facile, room temperature, time and cost-effective solid-state synthesis technique followed by characterizations using Fourier transform infra-red, UV-Visible, energy dispersive spectroscopic including X-ray diffractometry and field electron scanning microscopy. Te exfoliates polymeric segments of PANI by bonding benzenoid rings through sulphonated impurity sites which have a profound impact on symmetry molecular bond vibrations. Its analysis is presented. In photophysical application, both dark and luminescent I-V measurements have been performed that showed a linear variation with minimum photo-resistance offered by 10% composite and reaching current > 10�mA under 1.5�V biased conditions. In storage response, Te @ PANI supercapacitor devices are dominating in inductive coupling over capacitive coupling by ten times. Corresponding shunt impedance is seen to be favourably lower for 10% composition, and respective charge transfer impedance has also followed identical behaviour over other classes of samples. The quality factor of the device for 10% is found to be almost twelve times better. However, at a low scan rate (10�mV/s), the presence of Te has changed the tendency of ion migration, thereby, reducing the magnitude of ion current by about three times with an increase in Te from 5 to 15%. Thus, fabricated composite demonstrated synergistic aspects of energy. � 2023, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.Item Coupling Nonstoichiometric Zn0.76Co0.24S with NiCo2S4Composite Nanoflowers for Efficient Synergistic Electrocatalytic Oxygen and Hydrogen Evolution Reactions(American Chemical Society, 2022-12-15T00:00:00) Biswas, Rathindranath; Thakur, Pooja; Ahmed, Imtiaz; Rom, Tanmay; Ali, Mir Sahidul; Patil, Ranjit A.; Kumar, Bhupender; Som, Shubham; Chopra, Deepak; Paul, Avijit Kumar; Ma, Yuan-Ron; Haldar, Krishna KantaTransition-metal sulfide-based composite nanomaterials have garnered extensive interest not only for their unique morphological architectures but also for exploring as a noble-metal-free cost-effective, durable, and highly stable catalyst for electrochemical water splitting. In this work, we synthesized in situ nonstoichiometric Zn0.76Co0.24S with NiCo2S4binary composite flowers (Zn0.76Co0.24S/NiCo2S4) in one step by thermal decomposition of Zn2[PDTC]4and Ni[PDTC]2complexes by a solvothermal process in a nonaqueous medium from their molecular precursor, and their potential application in electrochemical oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) was investigated. Field-emission scanning electron microscopy and transmission electron microscopy analyses revealed the flower-shaped morphology of as-synthesized Zn0.76Co0.24S/NiCo2S4. Again, the structural and chemical compositions were confirmed through powder X-ray diffraction and X-ray photoelectron spectroscopy studies, respectively. The as-obtained 3D flower-type Zn0.76Co0.24S/NiCo2S4nanostructure was further subject to electrochemical OER and HER in alkaline and acidic media, respectively. Zn0.76Co0.24S/NiCo2S4showed low overpotential values of 248 mV (Tafel slope, 85 mV dec-1) and 141 mV (Tafel slope, 79 mV dec-1) for OER and HER activities, respectively, due to the synergistic effects of Zn0.76Co0.24S and NiCo2S4. Several long-term stability tests also affirmed that the Zn0.76Co0.24S/NiCo2S4composite nanostructure is a highly stable and efficient electrocatalyst toward OER and HER activities as compared to the recently reported superior bifunctional electrocatalysts as well as state-of-the-art materials. � 2023 American Chemical Society. All rights reserved.Item Direct Michael addition/decarboxylation reaction catalyzed by a composite of copper ferrite nanoparticles immobilized on microcrystalline cellulose: an eco-friendly approach for constructing 3,4-dihydrocoumarin frameworks(Royal Society of Chemistry, 2022-10-27T00:00:00) Kumar, Bhupender; Borah, Biplob; Babu, J. Nagendra; Chowhan, L. RajuA composite of copper ferrite oxide nanoparticles immobilized on microcrystalline cellulose (CuFe2O4@MCC) was synthesized. The synthesized composite was characterized by FESEM with EDS-Mapping, TEM, P-XRD, TEM, and BET analysis and investigated for its catalytic activity toward Tandem Michael addition and decarboxylation of coumarin-3-carboxylic acid with cyclic 1,3-diketones to obtain novel 3,4-dihydrocoumarin derivatives. This protocol was established with wide substrate scope and significant yield. The significant characteristics of this methodology are mild reaction conditions, easy setup procedure, non-toxic, and cost-effectiveness. A gram-scale synthesis with low catalyst loading was also demonstrated. � 2022 The Royal Society of Chemistry.