School Of Basic And Applied Sciences
Permanent URI for this communityhttps://kr.cup.edu.in/handle/32116/17
Browse
5 results
Search Results
Item Mesoporous carbon/titanium dioxide composite as an electrode for symmetric/asymmetric solid?state supercapacitors(Elsevier Ltd, 2022-08-27T00:00:00) Arya, Anil; Iqbal, Muzahir; Tanwar, Shweta; Sharma, Annu; Sharma, A.L.; Kumar, VijayThis paper reports the successful synthesis of mesoporous carbon/titanium dioxide (MC/TiO2) composite electrodes via the hydrothermal method for supercapacitor (SC) applications. The morphology and structural properties of MC/TiO2 composites were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectra (FTIR). The electrochemical properties were recorded by cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD) with an electrolyte (6 M KOH) in symmetric/asymmetric configuration. The specific capacitance (Cs) evaluated by CV is about 280F/g for composite electrode (95 % capacitance retention after 1000 cycles) and pristine has 150F/g @ 10 mV/s. Enhancement in capacitance is owing to faster charge dynamics within electrode material. The fabricated asymmetric device demonstrates high energy density (30.31 Wh/kg), than the symmetric configuration (?27 Wh/kg). Finally, both symmetric/asymmetric supercapacitors have illuminated a red LED, and strengthens the candidature of composite electrode for energy storage technology. � 2022 Elsevier B.V.Item Enhanced capacitive behaviour of graphene nanoplatelets embedded epoxy nanocomposite(Springer, 2021-01-06T00:00:00) Raval, Bhargav; Sahare, P.D.; Mahapatra, S.K.; Banerjee, I.For the development of advanced polymer nanocomposite processability, high-quality and cost-efficiency plays a crucial role which combines mechanical robustness with functional electrochemical properties. In this study, we fabricated the epoxy/graphene nanocomposite (EGNC) with different wt% ratio of graphene nanoplatelets (GNPs). The EGNCs were fabricated through a solution mixing process and used it as an electrode to enhance electrochemical properties. The GNPs and EGNCs characterized using XRD, Raman spectroscopy, ATR FT-IR, and FE-SEM for the structural conformation and surface morphological study. The electrochemical analysis results show significant improvement in the specific capacitance in the EGNC samples as compared to the blank epoxy film. Specific capacitance 17.74 Fg?1 was recorded at 10 mVs?1 scan rate in 1.0�M KOH electrolyte solution for the 1.0 wt% EGNC film by cyclic voltammetry analysis. The Galvanostatic charge�discharge and Ragone plots also show mended results by the addition of GNPs. � 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC part of Springer Nature.Item Nanofiller-assisted Na+-conducting polymer nanocomposite for ultracapacitor: structural, dielectric and electrochemical properties(Springer, 2021-01-04T00:00:00) Kamboj, Vashu; Arya, Anil; Tanwar, Shweta; Kumar, Vijay; Sharma, A.L.We report the preparation of ZrO2 nanofiller-incorporated polymer nanocomposite electrolyte based on the PEO-NaPF6 matrix via standard solution cast method. The structure and morphology of polymeric films have been examined with X-ray diffraction and field emission scanning electron microscopy. Different interactions between the polymer, salt and nanofiller have been examined by Fourier transform infrared technique. The temperature-dependent (40�100��C) electrical conductivity has been examined from complex impedance spectroscopy (CIS). The highest ionic conductivity is exhibited by 5�wt% nanofiller-based electrolyte and recorded ~ 2 � 10�4�S�cm?1 at 100��C. The voltage stability window of polymeric film checked from linear sweep voltammetry is about ~ 4�V, and ion transference number close to unity confirms the major contribution from ion conduction. The dielectric properties have been explored in terms of complex permittivity, loss tangent and complex conductivity. The dielectric plots have been further fitted with an associated equation to evaluate principal dielectric parameters. The optimized polymer electrolyte possesses the lowest relaxation time and the highest dielectric constant that suggests the highest ionic conductivity, which is in good correlation with impedance results. The dc conductivity is also highest for the optimum system, and relaxation time decreases with an increase in temperature. The thermal stability of polymer electrolytes is about 200��C, as examined by thermogravimetric analysis (TGA). The ion transport parameters n, ?, D have been evaluated via FTIR, impedance spectroscopy and Bandara and Mellander (B�M) approach. Finally, the optimized polymer nanocomposite film has been used as an electrolyte-cum-separator for the fabrication of a solid-state symmetric supercapacitor. The electrochemical parameters specific capacitance, energy density, power density have been examined from cyclic voltammetry and galvanostatic charge�discharge technique. It may be concluded that nanofiller incorporation is an effective strategy to enhance the properties of electrolyte and has the potential to adopt as an electrolyte-cum-separator for ultracapacitor. � 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC part of Springer Nature.Item Ferrocene decorated homoleptic silver(I) clusters: Synthesis, structure, and their electrochemical behaviour(Elsevier B.V., 2021-06-07T00:00:00) Khirid, Samreet; Jangid, Dilip Kumar; Biswas, Rathindranath; Meena, Sangeeta; Sahoo, Subash C.; Verma, Ved Prakash; Nandi, Chandan; Haldar, Krishna Kanta; Dhayal, Rajendra S.Silver(I) ferrocenyl dithiophosphonato [Ag{S2P(OiPr)Fc}]n I, [Fc = Fe(?5-C5H4)(?5-C5H4)] 1D polymer was yielded via a ligand exchange reaction between silver nanocluster [Ag21(S2P(OiPr2)12)]PF6 and monoanionic [S2P(OiPr)Fc]� ligand. As per molecular stoichiometry of 1, a direct reaction between [Ag(CH3CN)4]PF6 and [S2P(OiPr)Fc]? was performed in methanol solvent and surprisingly, generate a tetrahedral Ag4{S2P(OiPr)Fc}4 2 cluster instead of 1. Both (1 and 2) clusters are the novel example of homoleptic Ag(I) complexes supported by ferrocenyl dithiophosphonates. Molecular structure of these clusters was unequivocally established by single crystal X-ray crystallographic analyses and supported by the ESI-MS, and 1H and 31P NMR spectroscopy. Structural elucidations reveal that compound 1 has subsequently Ag2S2 square plane and Ag2S4P2 twisted boat units to build a long chain 1D polymer. The cluster 2 exhibits with a tetrahedral Ag(I) core framed by four [S2P(OiPr)Fc]? ligands. interstingly, the [S2P(OiPr)Fc]? ligand display a trimetallic triconnective (?3; �1, �2) bonding pattern in both molecules. The electrochemical behaviours of both compounds (1 and 2) were studied by using cyclic voltammetry, which shows a single wave for all the peripheral ferrocenes and implies negligible electrostatic factor between all ferrocene moieties. � 2021Item H 2 O 2 sensing through electrochemically deposited thionine coated ITO thin film(Cellular and Molecular Biology Association, 2017) Singh P.; Srivastava S.; Singh S.K.Progression and initiation of different diseases including pulmonary diseases, alzheimer's and tumors are linked with the oxidative stress, an important cause of cell damage. Different antioxidant enzymes are involved in detoxifying reactive oxygen species including hydrogen peroxide (H 2 O 2 ) that is generated in response to various stimuli and has important role in cell activation & bio-signaling processes. Herein, we developed hydrogen peroxide electrochemical sensor based on horseradish peroxidase (HRP) entrapped polymerized thionine (PTH) film. Electrochemical deposition of thionine (dye) on indium tin oxide (ITO) surface was carried out through chornoamperometry followed by cyclic voltammetry. Deposited thionine thin film obtained was checked for its stability at different scan rates. The PTH-modified electrodes showed linear dependence of peak current with scan rate within the range of 20 to 100 mV s -1 . Thionine used as electron transfer mediator between heme site of HRP and electrode. Cyclic voltammetry showed increase in the reduction peak current due to electrocatalytic reduction of H 2 O 2 . The sensor detection limit range from 10 -1 -10 2 ?M and limit of detection was 0.1?M. The proposed sensor has good storage response, cost effective, high sensitivity and wide linear range that could be used for the fabrication of other enzyme based biosensors.