School Of Basic And Applied Sciences
Permanent URI for this communityhttps://kr.cup.edu.in/handle/32116/17
Browse
12 results
Search Results
Item Biosynthesis of Zinc Oxide Nanoparticles Using Catharanthus Roseus Leaves and Their Therapeutic Response in Breast Cancer (MDA-MB-231) Cells(Routledge, 2021-07-26T00:00:00) Bangroo, Apoorva; Malhotra, Akshay; Sharma, Uttam; Jain, Aklank; Kaur, AnupreetAs the current study reports the utilization of the leaf extract of Catharanthus roseus (C.roseus) for the biological synthesis of zinc oxide nanoparticles (ZnO NPs) because of the importance of the importance of health and environment. Bioinspired synthesis were characterized using Fourier Transform Infrared Spectroscopy (FT-IR), Field Emission-Scanning Electron Microscopy (FE-SEM), Transmission Electron Microscopy (TEM), Energy-Dispersive X-ray Spectroscopy (EDX) and X-Ray diffraction (XRD). XRD and TEM micrograph analysis revealed that the synthesized nanostructures were well-dispersed and spherical with the average particle size in the 18-30 nm range were produced. The FT-IR spectra confirmed presence of phenolic compounds that act as reducing and capping agents. Further, it suggested the possible utilization of hydroxyl groups and amides in the reduction of Zn ions and stablization of ZnO NPs. Zinc oxide nanomaterials are effective in cancer treatments, including the destruction of tumor cells with minimal damage to healthy cells. The toxicity of zinc oxide nanomaterials was checked in vitro in the human breast cancer line MDA-MB-231. Inverse relation of the percentage of viable cells to the concentration of zinc oxide nanomaterials at increasing molar levels was assessed. The cytotoxicity analysis used in the MTT test shows the substantial viable MDA-MB-231-cells despite the increased concentration of exposure to zinc oxide nanomaterials. Reduction in the ratio of viable MDA-MB-231 cells after being exposed to zinc oxide nanomaterials was compared to untreated cancerous cells. The present approach to biosynthesis is quick, inexpensive, eco-friendly, and high-rise stable nanomaterials of zinc oxide with substantial cancer potential. This is the first study that reports molar concentrations (with the lowest concentration of 10 mM) as an anticancer agent for breast cancer and potential clinical uses for synthesized zinc oxide nanomaterials. Thus, C. roseus based synthesized ZnO NPs could be explored not only as environmentally benign method but also as a potential anti-carcinogenic agent. � 2022 Taylor & Francis Group, LLC.Item Mesoporous carbon/titanium dioxide composite as an electrode for symmetric/asymmetric solid?state supercapacitors(Elsevier Ltd, 2022-08-27T00:00:00) Arya, Anil; Iqbal, Muzahir; Tanwar, Shweta; Sharma, Annu; Sharma, A.L.; Kumar, VijayThis paper reports the successful synthesis of mesoporous carbon/titanium dioxide (MC/TiO2) composite electrodes via the hydrothermal method for supercapacitor (SC) applications. The morphology and structural properties of MC/TiO2 composites were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectra (FTIR). The electrochemical properties were recorded by cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD) with an electrolyte (6 M KOH) in symmetric/asymmetric configuration. The specific capacitance (Cs) evaluated by CV is about 280F/g for composite electrode (95 % capacitance retention after 1000 cycles) and pristine has 150F/g @ 10 mV/s. Enhancement in capacitance is owing to faster charge dynamics within electrode material. The fabricated asymmetric device demonstrates high energy density (30.31 Wh/kg), than the symmetric configuration (?27 Wh/kg). Finally, both symmetric/asymmetric supercapacitors have illuminated a red LED, and strengthens the candidature of composite electrode for energy storage technology. � 2022 Elsevier B.V.Item Nanofiller-assisted Na+-conducting polymer nanocomposite for ultracapacitor: structural, dielectric and electrochemical properties(Springer, 2021-01-04T00:00:00) Kamboj, Vashu; Arya, Anil; Tanwar, Shweta; Kumar, Vijay; Sharma, A.L.We report the preparation of ZrO2 nanofiller-incorporated polymer nanocomposite electrolyte based on the PEO-NaPF6 matrix via standard solution cast method. The structure and morphology of polymeric films have been examined with X-ray diffraction and field emission scanning electron microscopy. Different interactions between the polymer, salt and nanofiller have been examined by Fourier transform infrared technique. The temperature-dependent (40�100��C) electrical conductivity has been examined from complex impedance spectroscopy (CIS). The highest ionic conductivity is exhibited by 5�wt% nanofiller-based electrolyte and recorded ~ 2 � 10�4�S�cm?1 at 100��C. The voltage stability window of polymeric film checked from linear sweep voltammetry is about ~ 4�V, and ion transference number close to unity confirms the major contribution from ion conduction. The dielectric properties have been explored in terms of complex permittivity, loss tangent and complex conductivity. The dielectric plots have been further fitted with an associated equation to evaluate principal dielectric parameters. The optimized polymer electrolyte possesses the lowest relaxation time and the highest dielectric constant that suggests the highest ionic conductivity, which is in good correlation with impedance results. The dc conductivity is also highest for the optimum system, and relaxation time decreases with an increase in temperature. The thermal stability of polymer electrolytes is about 200��C, as examined by thermogravimetric analysis (TGA). The ion transport parameters n, ?, D have been evaluated via FTIR, impedance spectroscopy and Bandara and Mellander (B�M) approach. Finally, the optimized polymer nanocomposite film has been used as an electrolyte-cum-separator for the fabrication of a solid-state symmetric supercapacitor. The electrochemical parameters specific capacitance, energy density, power density have been examined from cyclic voltammetry and galvanostatic charge�discharge technique. It may be concluded that nanofiller incorporation is an effective strategy to enhance the properties of electrolyte and has the potential to adopt as an electrolyte-cum-separator for ultracapacitor. � 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC part of Springer Nature.Item Ag-S Type Quantum Dots versus Superatom Nanocatalyst: A Single Sulfur Atom Modulated Decarboxylative Radical Cascade Reaction(American Chemical Society, 2023-04-06T00:00:00) Meena, Sangeeta; Dastider, Saptarshi G.; Nishad, Chandra Shekhar; Jangid, Dilip Kumar; Kumar, Pankaj; Khirid, Samreet; Bose, Shubhankar Kumar; Mondal, Krishnakanta; Banerjee, Biplab; Dhayal, Rajendra S.The preparation of high-nuclearity silver nanoclusters in quantitative yield remains exclusive and their potential applications in the catalysis of organic reactions are still undeveloped. Here, we have synthesized a quantum dot (QD)-based catalyst, [Ag62S13(SBut)32](PF6)4 (denoted as Ag62S12-S) in excellent yield that enables the direct synthesis of pharmaceutically precious 3,4-dihydroquinolinone in 92% via a decarboxylative radical cascade reaction of cinnamamide with ?-oxocarboxylic acid under mild reaction conditions. In comparison, a superatom [Ag62S12(SBut)32](PF6)2 (denoted as Ag62S12) with identical surface anatomy and size, but without a central S2- atom in the core, gives an improved yield (95%) in a short time and exhibits higher reactivity. Multiple characterization techniques (single-crystal X-ray diffraction, nuclear magnetic resonance (1H and 31P), electrospray ionization mass spectrometry, energy dispersive X-ray spectroscopy, Brunauer-Emmett-Teller (BET), Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis) confirm the formation of Ag62S12-S. The BET results expose the total active surface area in supporting a single e- transfer reaction mechanism. Density functional theory reveals that leaving the central S atom of Ag62S12-S leads to higher charge transfer from Ag62S12 to the reactant, accelerates the decarboxylation process, and correlates the catalytic properties with the structure of the nanocatalyst. � 2023 American Chemical Society.Item Green synthesis of hybrid papain/Ni3(PO4)2 rods electrocatalyst for enhanced oxygen evolution reaction(Royal Society of Chemistry, 2022-10-21T00:00:00) Ahmed, Imtiaz; Biswas, Rathindranath; Singh, Harjinder; Patil, Ranjit A.; Varshney, Rohit; Patra, Debabrata; Ma, Yuan-Ron; Haldar, Krishna KantaHydrogen production using electrocatalytic water splitting provides encouraging innovations for enduring and clean energy generation as an option in contrast to traditional energy sources. Improvement in exceptionally dynamic electrocatalysts is of tremendous interest for work on the proficiency of gas generation, which has been emphatically blocked because of the sluggish kinetics of the oxygen evolution reaction (OER). We have synthesized a noble rod-shaped papain/Ni3(PO4)2 catalyst, which was further explored for electrocatalytic OER activity. An environmentally benign approach was applied to prepare binary papain/Ni3(PO4)2 in the presence of papain obtained from green papaya fruit. The yield of Ni3(PO4)2 rod structures could be controlled by varying the amount of papain extract during reaction conditions. The morphology and structural properties of the biogenic papain/Ni3(PO4)2 electrocatalyst were investigated with various microscopic and spectroscopic techniques, for example, FE-SEM, XRD, XPS, and FTIR. To show how such a papain/Ni3(PO4)2 hybrid structure could deliver more remarkable electrocatalytic OER activity, we inspected the correlation between catalytic demonstrations of the papain/Ni3(PO4)2 catalyst and its constituents, and the role of papain on its own was studied during the OER process. A biosynthesised papain/Ni3(PO4)2 catalyst exhibits excellent electrochemical OER performance with the smallest overpotentials of 217 mV, 319 mV and 431 mV in alkaline, neutral and acidic conditions, respectively, at 10 mA cm?2 current density. Transport of ions and electrons is also assisted by the long peptide backbone present in papain, which plays an important role in boosting OER activity. Our results reveal that papain/Ni3(PO4)2 shows better electrocatalytic OER execution along with cyclic stability compared to its different counterparts, owing to synergism-assisted enhancement by several amino acids from papain with metal ions in Ni3(PO4)2 � 2022 The Royal Society of Chemistry.Item Interfacial Engineering of CuCo2S4/g-C3N4Hybrid Nanorods for Efficient Oxygen Evolution Reaction(American Chemical Society, 2021-07-29T00:00:00) Biswas, Rathindranath; Thakur, Pooja; Kaur, Gagandeep; Som, Shubham; Saha, Monochura; Jhajhria, Vandna; Singh, Harjinder; Ahmed, Imtiaz; Banerjee, Biplab; Chopra, Deepak; Sen, Tapasi; Haldar, Krishna KantaAltering the morphology of electrochemically active nanostructured materials could fundamentally influence their subsequent catalytic as well as oxygen evolution reaction (OER) performance. Enhanced OER activity for mixed-metal spinel-type sulfide (CuCo2S4) nanorods is generally done by blending the material that has high conductive supports together with those having a high surface volume ratio, for example, graphitic carbon nitrides (g-C3N4). Here, we report a noble-metal-free CuCo2S4 nanorod-based electrocatalyst appropriate for basic OER and neutral media, through a simple one-step thermal decomposition approach from its molecular precursors pyrrolidine dithiocarbamate-copper(II), Cu[PDTC]2, and pyrrolidine dithiocarbamate-cobalt(II), Co[PDTC]2 complexes. Transmission electron microscopy (TEM) images as well as X-ray diffraction (XRD) patterns suggest that as-synthesized CuCo2S4 nanorods are highly crystalline in nature and are connected on the g-C3N4 support. Attenuated total reflectance-Fourier-transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy studies affirm the successful formation of bonds that bridge (Co-N/S-C) at the interface of CuCo2S4 nanorods and g-C3N4. The kinetics of the reaction are expedited, as these bridging bonds function as an electron transport chain, empowering OER electrocatalytically under a low overpotential (242 mV) of a current density at 10 mA cm-2 under basic conditions, resulting in very high durability. Moreover, CuCo2S4/g-C3N4 composite nanorods exhibit a high catalytic activity of OER under a neutral medium at an overpotential of 406 mV and a current density of 10 mA cm-2. � 2021 American Chemical Society.Item Combing of picogram level DNA equivalent to genomic DNA present in single human cell by self propelled droplet motion over a stable gradient surface(Academic Press Inc., 2023-11-08T00:00:00) Yadav, Hemendra; Algaonkar, Prashant S.; Chakraborty, Sudip; Ramakrishna, WusirikaDNA combing is a powerful technique for studying replication profile, fork-directionality and fork velocity. At present, there is requirement of a methodology to comb DNA present in a single human cell for studying replication dynamics at early embryonic stage. In our study, a surface having dual characteristics i.e., affinity towards negatively charged single DNA molecules and a hydrophobic gradient for self propelled droplet motion of combing solution was developed. The surface was made by coating of TCOS (trichloro-octylsilane) by vapor diffusion on APTES (Aminopropyl-triethoxysilane) coated glass slides. A gradient surface having high deposition efficiency (DE) was developed on which 5 picogram DNA equivalent to genomic DNA present in one single human cell can be combed. The gradient surface was thermostable in nature having the ability to sustain boiling temperature for two hours and sustain anisotropy in 70 % ethanol for 80 h. Applicability for multiple runs was enhanced such that the surface can be used for 13�14 times. Factors associated with gradient surface are unidirectional movement of combing solution droplet over the gradient surface for combing straight DNA molecules and a longer gradient surface of more than 1 cm such that long size DNA molecules can be combed. Ellipsometry and contact angle hysteresis confirmed the presence of hydrophobic gradient. XPS (X-ray photoelectron spectroscopy) and FTIR (Fourier Transform Infrared Spectroscopy) confirmed the presence of characteristic affinity towards negatively charged DNA molecules on the gradient surface. Combing solution was optimized for increasing deposition efficiency and for increasing the applicability of gradient surface for multiple runs. High temperature of combing solution was found to increase Deposition Efficiency. Combing solution was also optimized for combing single DNA molecules over the gradient surface. Single DNA molecules were combed by reducing pH and lowering concentration of triton-X in the combing solution. Dye: bp ratio was optimized for high fluorescent intensity and low surface background. � 2023 Elsevier Inc.Item Structural, electrical properties and dielectric relaxations in Na+-ion-conducting solid polymer electrolyte(Institute of Physics Publishing, 2018) Arya, A.; Sharma, A.L.In this paper, we have studied the structural, microstructural, electrical, dielectric properties and ion dynamics of a sodium-ion-conducting solid polymer electrolyte film comprising PEO8-NaPF6+ x wt. % succinonitrile. The structural and surface morphology properties have been investigated, respectively using x-ray diffraction and field emission scanning electron microscopy. The complex formation was examined using Fourier transform infrared spectroscopy, and the fraction of free anions/ion pairs obtained via deconvolution. The complex dielectric permittivity and loss tangent has been analyzed across the whole frequency window, and enables us to estimate the DC conductivity, dielectric strength, double layer capacitance and relaxation time. The presence of relaxing dipoles was determined by the addition of succinonitrile (wt./wt.) and the peak shift towards high frequency indicates the decrease of relaxation time. Further, relations among various relaxation times () have been elucidated. The complex conductivity has been examined across the whole frequency window; it obeys the Universal Power Law, and displays strong dependency on succinonitrile content. The sigma representation () was introduced in order to explore the ion dynamics by highlighting the dispersion region in the Cole-Cole plot () in the lower frequency window; increase in the semicircle radius indicates a decrease of relaxation time. This observation is accompanied by enhancement in ionic conductivity and faster ion transport. A convincing, logical scheme to justify the experimental data has been proposed. ? 2018 IOP Publishing Ltd.Item Facile chemical bath deposition method for interconnected nanofibrous polythiophene thin films and their use for highly efficient room temperature NO2 sensor application(Elsevier B.V., 2017) Kamble, D.B.; Sharma, A.K.; Yadav, J.B.; Patil, V.B.; Devan, R.S.; Jatratkar, A.A.; Yewale, M.A.; Ganbavle, V.V.; Pawar, S.D.Interconnected nanofibrous polythiophene (INPTh) film was deposited on the glass substrate through a simple chemical bath deposition method. The influence of monomer concentration on INPTh film properties as well as on NO2sensing properties of the film was studied. The morphological and structural studies were carried out using FTIR spectroscopy, FE-SEM microscope, and AFM analysis. The FTIR spectra confirmed the formation of PTH structure. The interconnected nanofibrous surface morphology was observed in FE-SEM images. The roughness of the film and thickness (225?nm?442?nm) was found to increase with monomer concentration up to 0.5?M, after that, both decreased at 0.6?M monomer concentration. The highest selectivity of PTh thin film towards NO2was observed than the other gases like H2S, SO2, NH3, CO and LPG. The influence of film morphology and thickness on gas sensing properties was observed, which was varied with monomer concentration. The film deposited at 0.5?M monomer concentration showed the highest NO2gas response of 47.58% at room temperature. Present results revealed that monomer concentration was also one of the deposition parameters for tuning the morphological as well as gas sensing properties of the chemical bath deposited PTh film. ? 2017 Elsevier B.V.Item Amino acid functionalized zinc oxide nanostructures for cytotoxicity effect and hemolytic behavior: Theoretical and experimental studies(Elsevier Ltd, 2017) Singh, Satvinder; Singh, Baljinder; Sharma, Prateek; Mittal, Anu; Kumar, Sanjeev; Saini, G.S.S.; Tripathi, S.K.; Singh, Gurinder; Kaura, AmanBlending of theoretical and experimental approach, provide an important strategy in designing the nanostructure at a microscopic level and helps in predicting the response of synthesized material towards inhibition of the growth of breast cancer cell. In this work, ab initio calculations using super cell approach are performed for three different amino acids (AAs)-Histidine (His), Arginine (Arg) and Aspartic acid (Asp) coated Zinc oxide (ZnO) nanostructures to explain the growth mechanism of nanoparticles (NPs) of different shapes. Based on the first principles calculations, we reveal that ZnO-AA (Arg and Asp) NPs results in rod like and ZnO-His NPs lead to tablet like configuration. Similar morphologies are fabricated using AAs through synthetic route. The effect of concentration ratio of reactants and pH has been studied. As synthesized samples, are characterized by using Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) and UV?Vis spectroscopy techniques. Based on the results, a plausible mechanism of formation of nanostructures has been proposed. The nanostructures with rod like morphology are found to be biocompatible with normal red blood cells and show cytotoxic effect as evaluated from hemolysis and cytotoxicity assays on breast (MCF-7, T47D, MDA-MB-231) & prostate cancer (PC-3) cell lines. ? 2017 Elsevier Ltd