School Of Basic And Applied Sciences

Permanent URI for this communityhttps://kr.cup.edu.in/handle/32116/17

Browse

Has files: YesSubject: search.filters.subject.Electrodes

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    Titania sensitized with SPADNS dye for dye sensitized solar cell
    (Springer New York LLC, 2016) Didwal, P.N.; Pawar, K.S.; Chikate, P.R.; Abhyankar, A.C.; Pathan, H.M.; Devan, R.S.
    Synthesis of anatase TiO2 nanoparticle with diameter about 25?nm is carried out by using chemical method and powder of TiO2 nanoparticle is pasted on fluorine doped tin oxide (FTO) coated glass by doctor blade. New organic SPADNS dye (C16H9N2Na3O11S3) is used first time to make the dye-sensitized solar cells (DSSC). Cell were constructed by using SPADNS dye loaded wide band gap anatase TiO2 nanoparticle on FTO coated glass as photo-anode, polyiodide as electrolyte, and platinum coated FTO as counter electrode. SPADNS dye was made from organic reagent which is low cost and easy available in market. Better adsorption of SPADNS dye on anatase TiO2 film is due to porous nature of TiO2. This better adsorption gives more transportation of electron from dye to TiO2 which increase the efficiency of solar cell. Although SPADNS dye is the first experiment with TiO2 nanoparticle for DSSC, it gives photocurrent (short-circuit current density) 1.04?mA/cm2, open-circuit voltage 0.59?V, with 0.9?% efficiency under 10?mW/m2 LED. ? 2016, Springer Science+Business Media New York.
  • Thumbnail Image
    Item
    Axial distribution of plasma fluctuations, plasma parameters, deposition rate and grain size during copper deposition
    (Taylor and Francis Inc., 2017) Gopikishan, S.; Banerjee, I.; Pathak, Anand; Mahapatra, S. K.
    Floating potential fluctuations, plasma parameters and deposition rate have been investigated as a function of axial distance during deposition of copper in direct current (DC) magnetron sputtering system. Fluctuations were analyzed using phase space, power spectra and amplitude bifurcation plots. It has been observed that the fluctuations are modified from chaotic to ordered state with increase in the axial distance from cathode. Plasma parameters such as electron density (ne), electron temperature (Te) and deposition rate (Dr) were measured and correlated with plasma fluctuations. It was found that more the deposition rate, greater the grain size, higher the electron density, higher the electron temperature and more chaotic the oscillations near the cathode. This observation could be helpful to the thin film technology industry to optimize the required film. ? 2017 Informa UK Limited, trading as Taylor & Francis Group.
  • Thumbnail Image
    Item
    Development of novel cathode materials based on MWCNT for energy storage/conversion devices
    (Springer Science and Business Media, LLC, 2017) Agnihotri, Shruti; Rattan, Sangeeta; Sharma, A. L.
    In Chap. 1, already available technology for energy storage solutions like capacitors, lead acid batteries, compressed air energy storage, flywheels has been discussed in order to compare their energy and power densities. Emphasis has been laid on Rechargeable Lithium ion Battery (Li-ion). Various materials which are already explored and used as cathode of battery has also been discussed with their merits and demerits. Further introduction of prepared orthosilicate material with used conductive additive Multiwalled carbon nano tube (MWCNT) has also given. In Chap. 2, methodology used to prepare respective Li2MnFeSiO4 material and its composite with MWCNT has been discussed in detail. Further, in order to validate its electrochemical application, different steps of cell assembly of Lithium half cell fabrication has also been discussed. Chapter 3 comprises of results obtained using standard Field emission scanning electron microscope (FESEM). Effect of used MWCNT on its morphology has been discussed in this chapter. A.C Impedance spectroscopy has been used to study variation in conductivity with respect to bared material. Possible reasons for increased conductivity with morphology has also been discussed in discussion. Chapter 4 includes conclusions drawn from mentioned results. This chapter summarizes measured conductivity values with different concentrations of MWCNT. Improved conductivity with respect to bared orthosilicate material has been pointed in this chapter. ? Springer International Publishing Switzerland 2017.